Science and Mathematics Equipment

All Products



Alcohol Glass Burner



Specification


  • 150ml Capacity
  • Clear, transparent, heavy-walled, bubble-free glass
  • Made of nickel-plated steel with tube permanently attached to a threaded base
  • Height - 103 mm
    Width - 83 mm
  • Threaded mouth
  • 190 grams
  • Features a globe shaped body and flat base
  • With nickel-plated steel snu cover
  • Replaceable wick is made of 3/16” braided cotton fiber with a minimum length of 150 mm that is fitted to the wick tube
  • With 6 pcs 3/16” x 7” long replacement wick that perfectly fit the wick tube.
  • For heating activities




Alcohol Thermometer



Specification


  • Partial Immersion type with immersion line indicator and ring top
  • Precision red alcohol-filled, reinforced bulbs, and with expansion chamber
  • Continuous Alcohol Column Range:-20°C to 110°C
  • Division: 1°C
  • Length - 300 mm
    Diameter - 6 mm
  • ± 1.0º C Accuracy
  • Clear and permanent markings; scale never washes out
  • Provided with non-roll plastic case and non-roll sleeve..
  • Measures temperature









Aneroid Barometer (Demonstration Type)


Specification


  • Dual graduation: mmHg and mbar(hPa).
  • Range: 960 to 1060 mbar with mmHg equivalent
  • Dial Diameter: 150mm
  • Rubber Compression Bulb with Tube
    (Change pressure can be demonstrated and obtained by compressing the rubber bulb).
  • English User's Manual
    (Operation Guide and Reset Procedure).














Aneroid Barometer (Wall Mount Type)


Specification


  • Dual graduation: mmHg and mbar(hPa)
  • Range: 960 to 1060 mbar with mmHg equivalent
  • Dial Diameter: 110mm
  • Plated bezel and plastic base
  • Shock resistant and heat resistant
  • With English User's Manual
    (Operation Guide and Reset Procedure).
















Beaker 50 mL



Specification


  • 50 ± 5% mL enameled onto the glass
  • Borosilicate, transparent, bubble- free glass
  • Single graduated Metric Scale
    Graduation starts at 10 mL in 10 mL increments
    Graduation Range : 10 - 40 mL
  • Thickness range: 2mm
    Height - 56 mm
    Outside Diameter - 42mm
  • Permanent white graduations, with white enamel marking spot
  • Easy-pour sprout
  • Graduation range: 10-40 mL
  • To contain and mix solids and liquids up to 50 mL capacity.
    For heating small amounts of substances up to more than 100°C.




Beaker 100 mL



Specification


  • 100 mL ± 5% enameled onto the glass
  • Borosilicate, clear and transparent bubble-free glass
  • Single graduated Metric Scale
    Graduation starts at 20 mL in 10 mL increments.
    Graduation Range: 20 mL to 80 mL
  • Height - 70 mm
    Outside Diameter - 50 mm
    Thickness - 2.0 mm
  • Permanent white graduations, with white enamel marking spot.
    Easy-pour spout
  • Used as a container for stirring, mixing and heating liquids.







Beaker 250 mL



Specification


  • 250 mL ± 5%, enameled onto the glass
  • Borosilicate, Transparent, Bubble-Free Glass
  • Double Graduated Metric Scale
    Marked to Fill: Graduation starts at 25 mL in 25 mL increments
    Marked to Empty: Graduation starts at 0 mL in 25 mL increments
    Graduation Interval : 25 mL
    Graduation Range : 25 - 200 mL
  • Height - 90 mm
    Outside Diameter - 70 mm
    Thickness - 2.0 mm
  • Permanent white graduations, with white enamel marking spot
    Easy-pour spout.
  • Used as a container for stirring, mixing and heating liquids.




Beaker 500 mL



Specification


  • 500 mL ± 5%, enameled onto the glass
  • Borosilicate, Clear, Transparent and Bubble-Free Glass
  • Double Graduated Metric Scale
    Marked to Fill: Graduation starts at 50 mL in 50 mL increments.
    Marked to Empty: Graduation starts at 0 mL in 50 mL increments.
    Graduation Range : 50 to 450 mL
  • Height - 139 mm Outside Diameter - 76 mm
    Thickness - 2.0 mm
  • Permanent white graduations, with white enamel marking spot.
  • Easy-pour spout.
  • To contain and mix solids and liquids and for heating substances up to more than 100°C




Beaker 1000 mL



Specification


  • 1000 mL ± 10%, enameled onto the glass
  • Borosilicate, Transparent, Bubble-Free Glass
  • Single Graduated Metric Scale
    Graduation starts at 100 mL in 50 mL increments.
  • Height - 156 mm
    Outside Diameter - 106 mm
    Thickness - 2.0 mm
  • Permanent white graduations, with white enamel marking spot
    Easy-pour spout.
  • Used as a container for stirring, mixing and heating liquids.




Beral Pipette Dropper



Specification


  • 1 mL, Plastic Material
  • 0.25 mL Graduation Interval
  • 140 mm
    Non-toxic, durable type, easy to clean and convenient
  • No rubber head
    Non-wetting so the pipets are easily rinsed and reused
    With molded graduations
  • To hold/transfer/dispense liquids up to 1 mL capacity







Bunsen Burner



Specification


  • Aluminum Burner Tube Diameter: 13mm
  • 154 mm Overall height
    With stabilizer top and serrated inlet tube
    With air regulator collar
    With threaded gas needle valve(located opposite to serrated inlet tube)
    Nickel-plated zinc-alloy base
  • Used for heating, sterilization, and combustion purposes.








Cork Stopper #5



Specification


  • Cork Stopper # 5 for Test Tube with 16mm Diameter
  • H - 22mm
    Top Ø - 17mm
    Bottom Ø - 13mm
    Dimension Tolerance ± 0.5mm
  • Extra Select Grade with fewer lenticels (crevices)
  • Used to seal test tubes to prevent liquids and gases to escape.








Cork Stopper #16 with 1 Hole



Specification


  • Cork Stopper #16 with 1 hole for 250 ml Erlenmeyer Flask
  • H - 38mm
    Top Ø - 35mm
    Bottom Ø - 28mm
    Hole Ø - 5mm
    Dimension Tolerance ± 0.5mm
  • Extra Select Grade with fewer lenticels (crevices)
  • Used to seal flasks and other glasswares
    Used to prevent liquids and gases to escape
    Used to prevent leaks, hazards, and contamination









Cork Stopper #16 with 2 Holes



Specification


  • Cork Stopper #16 with 2 Holes for 250 ml Erlenmeyer Flask
  • H - 38mm Top Ø - 35mm Bottom Ø - 28mm Hole Ø - 5mm Dimension Tolerance ± 0.5mm
  • Extra Select Grade with fewer lenticels (crevices)
  • Used to seal flasks and other glasswares
    Used to prevent liquids and gases to escape
    Used to prevent leaks, hazards, and contamination











DC Ammeter



Specification


  • Analog, Dual Range
  • Dual Range Selectable
    -0.2 - 0 - +0.6A /0.02 Read
    -1.0 - 0 - +3.0A / 0.1 Read ±2.5% Full Scale, Analog
  • W - 95 mm x H - 85 mm
  • Width - 96 mm
    Depth - 132 mm
    Height - 97 mm
  • Black
  • Binding post terminals, threaded, can accommodate 4 mm banana plug, brass material
    Color coded plastic insulation (black for negative or common terminal, red for positive terminal)
    External zero-adjust calibration
  • With English User’s Manual (Operation’s Guide)




DC Voltmeter



Specification


  • Analog, Dual Range
  • Dual Range Selectable
    -1 V - 0 - +3 V / 0.1 Read
    -5 V - 0 - +15 V / 1.0 Read
    ± 2.5% Full Scale, Analog
  • W - 95 mm x H - 85 mm
  • Width - 97 mm
    Depth - 132 mm
    Height - 97 mm
  • Black
  • Binding post terminals, threaded, can accommodate 4 mm banana plug, brass material
    Color coded plastic insulation (black for negative or common terminal, red for positive terminal)
    External zero-adjust calibration
  • With English User’s Manual (Operation’s Guide)




Dissecting Set with Pan



Specification


  • 10 pieces Dissecting Set that includes the following stainless steel instruments:
    - 1 piece Surgical Scissors, Length: 110 mm
    - 1 piece fine points scissors, Length: 110 mm
    - 1 piece fine points curved forceps, Length: 110 mm
    - 1 piece fine points straight tip forceps, Length: 110 mm
    - 1 piece mosquito forceps, curved tip
    - 1 piece scalpel 4 cm blade
    - 1 piece scalpel handle
    - 1 piece teasing needle angular with chuck
    - 1 piece teasing needle straight with chuck
    - 1 piece mall probe and seeker
  • 1 piece Stainless Steel Dissecting Pan 11 inches x 7 inches x 1.5 inches With Letherette Pouch
  • Used to perform a greater variety of dissections











Electrolysis Apparatus (Student-Type)


Specification


  • Glass jar: Ø = 4.5 inches; Height = 5 inches
  • With two platinum electrodes
  • With an acid-proof insulating support to hold the apparatus over the jar and with two binding posts (one red, one black)
  • With two spring clips to hold two 150 mm long and 20 mm diameter reusable borosilicate graduated glass test tubes (25 ml)
  • With power source: (220 V -240 VAC input) / (0-12 V DC output), with switch selector - Comes with two (2) connecting wires (1 red, 1 black) with alligator clips (1 red, 1 black) soldered on one end of each connecting wire with banana plugs (1 red, 1 black) on the other end of each connecting Wire Length: 12 inches; Type of Wire: Stranded Gauge no. 20
  • With 9-Volt Battery and 1 Battery Snap
  • With additional two (2) borosilicate reusable graduated glass test tubes (20 mm diameter and 150 mm long)
  • With two rubber stoppers to fit perfectly the 25 ml graduated reusable borosilicate glass test tube
  • Comes complete with a padded storage box to help prevent glass breakage
  • To demonstrate decomposition of water into its elements.




Electronic Pocket Scale 120g



Specification


  • 0.01 grams to 200 grams
  • LCD
  • High Contrast LCD
    Stability Indicator
    Overload and Under Load Indicators
    Low Battery Indicator
    Auto Shut-O
    With Power, Tare, Unit, and Pieces Button
  • 2 Lithium Batteries
  • With English User's Manual (Operation Guide, Guide on How to Replace the Battery, Procedure on the Proper Use, Handling and Storage.




















Erlenmeyer Flask 250 mL



Specification


  • 250 mL ±5%, enameled onto glass
  • Bubble-free, borosilicate, clear and transparent glass.
  • 50 mL to 200 mL in 25 mL increments
  • Height - 132 mm
    Outside Diameter - 80 mm
    Thickness - 2 mm
    Neck Inside Diameter - 27 mm
  • Heavy duty and beaded rim
    Permanent white graduation with white enamel marking spot.
  • For storing, mixing of chemical, and heating activities





















Evaporating Dish



Specification


  • Evaporating Dish, porcelain with pouring lip and spout
  • 75 mL Capacity
  • 82 mm Rim Diameter
  • 34 mm Height/Depth
  • Uniformly glazed inside (except for rim) and partly glazed outside except bottom surface.
  • For heating a substance, to separate mixtures like salt solution and to evaporate solvents in a sample












Filter Paper



Specification


  • Student Grade Filter Paper (Grade 1)
  • 600 mm x 600 mm
  • 150 sec/100 mL
  • To filter/separate solids from liquids



















Galvanometer



Specification


  • Analog, General Purpose Galvanometer
  • -500 to +500 µA
    Full Scale/10 µA Read
    Full Scale Accuracy of ± 2.5%
  • Width - 95.22 mm
    Height - 85 mm
  • Width - 97 mm
    Depth - 132 mm
    Height - 97 mm
  • Black Color
  • Binding post terminals, threaded, can accommodate 4 mm banana plug, brass material
    Color coded plastic insulation (black for negative or common terminal, red for positive terminal)
  • External zero-adjust calibration
  • With English User’s Manual (Operation’s Guide)




Glass Funnel



Specification


  • Borosilicate, Transparent, Bubble-Free Glass
  • Rim Inner Diameter - 70 mm
    Stem Length - 73 mm
    Outside Diameter of Stem Tube - 9 mm
  • Fluted with beaded edge and fire- polished rim
    With slanted tip and fire-polished stem
  • Directs the smooth flow of the liquid or fine-grained substances into another container












Glass Tubing



Specification


  • Glass Tubing, Soda Lime Glass with Fire Polished Ends
  • Diameter - 6 mm & 4 mm
    Length - 1220 mm Long
  • To connect other pieces of equipment to a gas or liquid assembly.


















Graduated Cylinder 10 mL



Specification


  • 10 mL Capacity
  • ±0.20 mL Tolerance
  • Bubble-Free, Borosilicate, Clear and Transparent Glass
  • 14 mm Outside Diamater
  • 178 mm Height
  • 1 mL to 10 mL in 0.1 mL interval
  • All markings are in permanent white enamel
    With funnel top and with pour spout
    Single metric scale, calibrated to deliver (TD)
    With plastic bumper guard
    Glass hexagonal base (non-detachable)
  • Measures the volume of liquids up to 10 mL








Graduated Cylinder 100 mL



Specification


  • 100 mL Capacity
  • ±0.60 Tolerance
  • Bubble-Free, Borosilicate, Clear and Transparent Glass
  • 5 mL to 100 mL in 1 mL interval
  • 255 mm Height
  • 30.5 mm Outside Diameter
  • All markings are in permanent white enamel
    With spout
    Single graduated metric scale
    With plastic bumper guard
    Glass hexagonal base (non-detachable)
    Ring marks at major graduations only; short line graduation for subgraduate markings is not in full ring marking.
  • Measures the volume of liquids







Graduated Pipette with Rubber Pipettor


Specification


  • Serological, transfer type, bubble-free borosilicate glass mark TD- To deliver
  • Clear and transparent and is graduated to tip, Zero at Top
  • Orange Color Code
  • 10 mL Capacity in 0.1 mL interval
    Graduation is in descending scale
  • Permanent amber markings which are enameled onto the glass, top end is contricted.
  • 3-Way Safety Bulb-Type Pipet Filler, Natural Rubber
  • Red Color With pinch release valves that control air evacuation, liquid uptake, and liquid dispensing
  • Filler fits standard size pipettes
  • To transfer liquids from one container to the other





Hand Gloves



Specification


  • Super Nitrile, Flock Lined Interior (Acid/Solvent Resistant) Hand Gloves
  • Size 8
  • Individually packed pair of gloves
  • For hand protection













Hand Lens 5x Magnification



Specification


  • 49.8 mm Lens Diameter
  • 5x Magnification Power (focal length is not greater than 60mm)
  • Mounted in a metal frame with handle
  • Used to produce a magnified image of an object.












Hand Lens 10x Magnification



Specification


  • Loupe 10x Magnifier
  • 23.29 mm Lens Diameter
  • 2.1 cm Focal Length
  • Glass lens/es, clear, and bubble-free.
  • Foldable stainless steel body and cover
    Individually packed in plastic box.
  • Enlarges in clear image of a focused tiny objects or parts in an object.










Landform Demonstration Kit



Specification


  • Watertight Demonstration Tray
    21 inches x 5 inches x 2 inches
  • Three pieces of flexible colored foam
  • Three pieces fault structures
    - Made of 6 colored layer of plastic
    - Dimension: 13 inches x 4.75 inches x 3.5 inches
    - Demonstrates normal, reverse and slide slip fault
  • Erupting volcano for demonstration
    - 7 inches x 6 inches
  • Used for geological study
  • English User's Manual (Guide on how to assemble and use the model)




Laboratory Hot Plate



Specification


  • Chemical resistant white ceramicflat surface top plate
  • 380°C Maximum Temperature
  • 200 mm x 200 mm
  • 220-240V AC 50/60 Hz
  • 800 Watts
    Digital display
    Control: Quick and easy adjustment knob
    Safety LED’s indicate when heating function has been activated.
  • With built-in support rod mount,thumbscrew, accommodates rods up to 13mm in diameter
    Aluminum casting body with powder coating.
  • For uniform heating of glasswares and its contents, solutions, and substances
    For sterilizing glasswares and other materials and for preparing chemicals used in scientific research.




Lens Paper



Specification


  • Fine, Soft, Silk-Like Paper, 50 sheets/pack
  • 4 inches x 6 inches
  • Never scratches objectives and glass lenses
  • For cleaning microscope slides, microscope objectives and other lenses



















Mortar and Pestle



Specification


  • Porcelain with pouring lip, rough interior and glazed exterior
  • 133 mm Outside Diameter
  • 11 mm Thickness
  • Heavy bat-shaped porcelain
    Uniformly glazed on its handle and rough on opposite end
  • 130 mm Length
  • For pulverizing, mashing or grinding, and mixing materials in a mortar using a pestle.














Petri Dish



Specification


  • Brosilicate circular glass with beaded edges, Bubble-free, Plain Surface, Autoclavable
  • Cover Outside Diameter - 98 mm
    Dish Outside Diameter - 90 mm
    Overall Height with Cover - 19.5 mm
    Thickness - 2 mm
  • Securely contains specimen under study

















Plastic Round Canister



Specification


  • Plastic Round Canister, 500 mL
  • Made of clear, plastic body
    Screw neck/twist-on lids
  • Opening Diameter - 125 mm
    Height - 95 mm
    Thickness - 1.5 mm
  • Label "Soil Sample"
  • Stores soil samples








Reagent Bottle 250 mL Narrow Mouth


Specification


  • Narrow Mouth, Amber Glass Reagent Bottle
  • 250 mL Capacity
  • Clear and Bubble-Free Amber Glass
  • Overall Height - 142 mm
    Bottle Diameter - 70 mm
    Neck Inside Diameter - 24 mm
  • Narrow mouth with ground-in plastic stopper
  • Use to contain/store prepared light sensitive solutions/substances.





Reagent Bottle 250 mL Wide Mouth


Specification


  • Transparent Glass, Wide Mouth Reagent Bottle
  • 250 mL Capacity
  • Overall Height - 139 mm
    Bottle Diameter - 70 mm
    Mouth Opening Diameter - 40 mm
  • Clear and bubble-free transparent glass
    Wide-mouth with ground-in glass stopper
    Air tight seal
  • Use to contain/store prepared solutions.





Rubber Stopper #0



Specification


  • Rubber Stopper #0 for Test Tube with 16 mm diameter
  • H - 25mm
    Top Ø - 17mm
    Bottom Ø - 13mm
  • ± 0.5mm Dimension Tolerance
  • 55-65 Duro
  • Used to seal test tubes to prevent liquids and gases to escape
    Used to prevent leaks, hazards, and contamination.





Rubber Stopper #6 with 1 Hole



Specification


  • Rubber Stopper #6 with 1 Hole for Erlenmeyer Flask
  • H - 25mm
    Top Ø - 31mm
    Bottom Ø - 26mm
    Hole Ø - 5mm
  • ± 0.5mm Dimension Tolerance
  • 55-65 Duro
  • Used to seal flask and other glassware to prevent liquids and gases to escape
    Used to prevent leaks, hazards, and contamination.





Rubber Stopper #6 with 2 Holes


Specification


  • Rubber Stopper #6 with 2 Holes for Erlenmeyer Flask
  • H - 25mm
    Top Ø - 32mm
    Bottom Ø - 26mm
    Hole Ø - 5mm
  • ± 0.5mm Dimension Tolerance
  • 55-65 Duro
  • Used to seal flask and other glassware to prevent liquids and gases to escape
    Used to prevent leaks, hazards, and contamination.





Safety Goggles



Specification


  • Polycarbonate Goggle Lens
  • Firm comfortable seal around forehead, cheeks, nose and temples protects against chemicals, dust and grindings.
  • Medium strap slotted to prevent slippage and holds the goggle more securely and safely.
  • 180° Panoramic View
  • ANSI Z87.1
  • For eye protection







Spatula



Specification


  • Porcelain and Uniformly glazed
  • 140 mm Overall Length
  • Spoon on one end, Spatula on the other
  • To transfer solids from one container to the other












Stirring Rod



Specification


  • Stirring Rod; Soda lime, transparent and clear glass
    With Rounded and Fire-Polished Ends
  • Ø 6 mm x 250 mm long
  • For mixing liquids and solids













Surgical Gloves



Specification


  • Sterile Latex Surgical Gloves for Single Use
  • Size 8
  • 50 pcs/box
  • Individually packed pair of gloves
    High strength and elasticity, tear-free cu
  • For hand protection










Test Tube



Specification


  • Borosilicate, bubble-free glass
  • 20 mL Capacity
  • Ø 16 mm x 150 mm
  • 1.5 mm Thickness with white permanent enamel marking spot
    Fire polished top and beaded rim
  • To hold and can withstand heating small amounts of solids and liquids










Toploading Electronic Balance



Specification


  • 500 Grams Load Capacity
  • 0.01 Grams Readability/Accuracy
  • 240 V / 50 Hz
  • LCD
    With large LCD display; Stainless steel pan
    With multiple weighing units and overload protection
    Automatic calibration; Standard RS232 interface
    Parts counting and percentage weighing
    Measures an object's mass up to 500g capacity
    With standard 500g mass provided




Universal pH Paper, pH 0-14



Specification


  • 100 Strips in a transparent box with complete color chart
  • 70 mm x 5 mm
  • Indicator test strip in four colors to test pH values.
  • Measures the pH of a substance or a solution indicating its acidity or alkalinity in comparison with a pH color chart








Vial 25 mL



Specification


  • Screw Neck Vial with Screw-Type Plastic Cap
  • 25 mL Capacity
  • Clear and Bubble-Free Glass
  • 26 mm Outside Diameter
  • 73 mm Length
  • Use to hold/contain and mix liquids and solids up to 25 mL capacity








Vial 50 mL



Specification


  • Screw Neck Vial with Screw-Type Plastic Cap
  • 50 mL Capacity
  • Clear and Bubble-Free Glass
  • 27 mm Outside Diameter
  • 107 mm Length
  • Use to hold/contain and mix liquids and solids up to 50 mL capacity








Volumetric Flask 250 mL



Specification


  • 250 mL, enamelled onto the glass
  • ±0.12 ml Tolerance
  • Bubble-free, Borosilicate, Clear and Transparent glass
  • 220 mm Height
  • 14/23 Closure size
  • With Plastic stopper with octagonal grip
    With single ground-in graduation line, circular white
    Calibrated "To Contain" (Marked "TC")
  • For precise dilutions and preparations of standard solutions for 250 mL capacity




Watch Glass



Specification


  • Borosilicate, concave shape, clear and bubble-free glass
    Fire-polished edges
  • 91 mm Diameter
  • 2 mm Thickness
  • To contain liquids and solids
    Used to cover glasswares like beakers
    To evaporate solvents in a sample
    To hold/contain liquids and solids for heating


Categories


PIXPRO ASIA

1817-25 España Blvd. Corner  Prudencio St, Sampaloc, Manila, 1008 Philippines

Tel.: (02) 734-7709

Email Us : customerservice@pixpro.asia

Copyright© 2019 PIXPRO. All Rights Reserved