Technical-Vocational and Livelihood Materials
Industrial Sewing Machine
- Over Lock Sewing Machine
- No. Of Threads: 3
- Stitch Length: 0-5mm
- Overlock Stitch Formation
- 1200-1600 Stitches Per Minute
- Needle type: DC-27 size 11 or equivalent
- Dual Pedal Stand
- 220 VAC to 240 VAC
60HZ Single Phase - 400 Watts
WD-737
3 THREAD OVER LOCK MACHINE
- Lockstitch Sewing Machine
- 1500-2000 Stitches Per Minute
- Stitch Length: 0-5mm
- Needle: DBx1 size 9 to 18 or equivalent
- Industrial Clutch Motor
- Needle Bar Stroke: 0 - 32mm
- Thread Stand, Bobbin Winder, Knee Lifter, Oil Pan or Reservoir
- 220 - 240 VAC
50 - 60 Hz Single Phase - 400 Watts
WD-8700
SINGLE NEEDLE LOCKSTITCH MACHINE
- Industrial Sewing Machine
- Size of Knife and Incision: 6 - 19mm
- 2500-3000 Stitches Per Minute
- Needle Bar Stroke: 0-34mm
- Maximum Material Thickness: 0-4mm
- 54 Needle - 345 Needle (Alternating Gear) DPx5#11 or equivalent
- Travelling Pedal
- Auto Lubrication
- Flat Bed Threadle
- Thread Stand and Bobbin Winder with Wooden Table
- 220 - 240 VAC
50 - 60 Hz Single Phase - 400 Watts
WD-781
BUTTON HOLER MACHINE
- Industrial Sewing Machine
- Chain Stitch
- Off the Arm
- 2500-3000 Stitches Per Minute
- Maximum Sewing Thickness: 10mm
- Stitch Length:
- Treadle, 4 Legs, Thread Stand and Wooden Table
- 220 - 240 VAC
50 - 60 Hz Single Phase - 400 Watts
WD-927
FEED OFF THE ARM MACHINE
- Industrial Sewing Machine
- Lock Stitch Formation
- 1500 - 1800 Stitches Per Minute
- Sewing Thickness:
-
Treadle, 4 Legs, Thread Stand and Bobbin Winder, Wooden Table
-
Cylinder Bed
- 220 VAC
60 Hz Single Phase - 400 Watts
WD-1850
BAR TACK MACHINE
- AC Voltage: 0.1 Volts to 1000 Volts
- DC Voltage: 0.1 Volts to 1000 volts
- Resistance range: X1 to X100K
- AC current: 150 mA to 1.5 uA
- DC current: 0.25 to 50 uA
- Test probe, Scale, Pointer, Zero Position Adjuster, Selector Knob, Zero Ohms Adjuster Knob, Test Probe Storage Space and Meter Cover
ANALOG MULTIMETER
DIGITAL MULTIMETER
- Automatic Polarity Indication
- Continuity Test with buzzer sound in circuit
- 3 inches LCD Display
- DC voltage: 0.1 mV - 1000 mV(±0.5% +3)
- AC voltage: 0.1 mV - 750 mV(±0.8% +5)
- AC current: 200 uA - 20 A (±10.8% +10)
- Resistance 200Ω- 200 MΩ(±0.8%+3)
- Frequency Measurement Range: 0 to 20 MHz (±0.1%+3)
- Temperature measuring range: -20°C to 1000°C (-4°F to 1832°F)
- Turn buzzer
- Power Source: 9V Battery
BATTERY TESTER
- Digital Multi Tester
- All Lead Acid Starter Battery -
including Regular Flooded, EFB, AGM Tablet Battery, AGM Winding Battery, GEL Battery and etc. - 6 to 30 Volts DC
- Test all 12 Volts car/motorcycle electrical system
- Has compensation adjustment for battery temperature of at least,
in Fahrenheit, 0°F to 125°F or, in Celsius, -18°C to 52°Celsius. - Determines proper activation of dry charged batteries
INSULATION RESISTANCE TESTER
- Voltage Range: 50 to 1000 volts
- Resistance Range: 50MΩ to 20 GΩ
- Test voltage: 50 V / 50MΩ to 1000 V / 20 GΩ
- Continuity Check Test: 200 mA to 300 mA
- Operating Temperature: 0°C to 40°C
- Storage temp.: - 20°C to - 60°C
- Test probe / lead & Leather casing
- Power source: 1.5 volts x 6 (AA battery)
EARTH RESISTANCE TESTER
- Earth Ground Voltage range: 0 to 600 Volts AC
- Earth Ground Resistance Range: 0.01 Ω to 3000 Ω
- Testing wires: 3 (1 red - 20 m), (1 green -
5 m), (1 yellow - 1 0 m) - Working temp. & humidity: -10°C to 40°C, below 80% RH
- Storage temp. & humidity: -20°C to 60°C, below 70% RH
- Testing wires length: 1.5 Meters
- Testing wire color: Red and Green
- Display, Data Hold, Data Read, Alarm. Spool of Wires, with Casing
DIGITAL CLAMP AMMETER
- Voltage Range: 0 to 600 Volts AC / DC
- Amperes Range: 0 to 600 Amperes
- Resistance range: 0 to 40 MΩ
- Frequency (A): 0 to 10 Mhz
- Frequency (V): 0 to 10 Mhz
- Test Probe / lead, Continuity buzzer
- Leather casing
- Battery Type: AAA 1.5 volts
Automotive Tools and Equipment
BORE GAUGE
- Dial, 0.01 graduation
- Measuring Range: from 35 mm to 150 mm
- Bore Depth: 150 mm
- Accuracy : 0.018 mm
- Repeatability: 0.003 mm
- No. of Anvils: 16 to 18
- Carbide tip on measuring plunger
SOLDERING IRON 150 WATTS
- Type: Gun type
- Voltage: 220 / 240 volts AC, 60Hz,
- Single phase
- Output Power: 150 Watts
- Interchangeable Copper Tip
DIAL INDICATOR
- Satin Chrome Plated Steel
- Bezel Diameter: 58 mm with Transparent Dial Cover with Adjustable Scale and Stop Screw
- Stem Diameter: 8 mm
- Range: 0 to 10 mm, 0.01 Graduations
- Plunger Length: 20 mm w/ removable Tungsten Carbide Tip
- Plunger Diameter: 6 mm
- Thickness: 24 mm
- With Back Lug
Magnetic Stand with Complete Dial Indicator Holder
- Rated Voltage: 220 / 240 volts AC, 50 / 60 hz.
- Power in Watts: 500 Watts
- Phase: Single
- Overall Length: 14.5 inches
- Maximum Temperature: 550°C
- Tip shank diameter: 1 1/8 inches (heavy duty)
- Tip length: 6 inches
- Tip materials: Flat copper
- 1.5 Meters Power Cord with Moulded Male Plug
HEAVY DUTY SOLDERING IRON
500 WATTS
SOLDERING IRON 300 WATTS
- Rated Voltage: 220 / 240 volts AC, 50 /60 hz.
- Power in Watts: 300 watts
- Maximum Tip Temp.: 550°C
- Overall length: 15 to 17 inches
- Tip shank Diameter: 1 1/8 inches (heavy duty)
- Tip Length: 6 inches
- Tip Material: Flat copper
- 1.5 meters Power Cord with Moulded Male Plug
IGNITION TIMING LIGHT
- Screen: Digital LCD Readout
- Material: Plastic
- Item Package Dimension: 14.5 inches x 10 inches x 3.5 inches
- Slim, Rotating Barrel for Better Aim at Timing Mark
- LED Diagnostic Indicator Shows Accurate Engine RPM, Dwell angle, Volt and Advance Degree
- Replaceable xenon flash tube
- Enameled Frame and Satin Thimble and Sleeve
- Ratchet Handle Drive
- Carbide Tip
- Display: Analog
- Measuring Range: 0 to 25 mm
- Resolution: 0.01 mm
- Accuracy: 0.01
- With Calibration Standards and Wrenches
- Lock Nut
OUTSIDE MICROMETER
TACHOMETER
- Non-Contact Type
- 5 Digit LCD Display
- Measuring Range: 0 to 99,999 RPM
- Accuracy: +/- 0.05%
- Auto-Zero Adjustment
- Measuring Distance: 2 inches - 20 inches / 50mm to 500mm
- LED Light (Laser)
- Battery-Operated
PRICK PUNCH SET
- Hardened Tempered Steel
- Pin Loosening / Removal and Center Marking
- Set consist the following:
(5 pcs / set)
1 pc - 1/16 x 3 inches,
1 pc- 5/64 x 4 inches,
1 pc- 3/32 x 4 inches
1 pc - 1/8 x 4 inches,
1 pc - 5/32 x 4 inches -
With Round Shanks Shape and With Knurled for Grip
-
Size Marking is Punched / Embossed
VERNIER CALIPER 100MM
- Stainless Steel, Hardened
- English System Fractional and Metric Vernier Scale
- Measuring Range: 0-6 inches and 0- 150mm
- Resolution: 0.02mm
- With integrated depth rod
-
Precision Laser Engraved lines, Accurate Scale and Clear Lines
- Highly Polished Surface, Ensuring the Accuracy
-
Ergonomic Thumb Adjustment with Textured Grip
-
Lock Screw to hold the slide in position